Rita was a Managing Editor at Android Police. Once upon a time, she was a pharmacist as well. Her love story with Android started in 2009 and has been going stronger with every update, device, tip, app, and game. She lives in France, speaks three languages and a half, and watches a lot of TV series.

The GoControl sensors use batteries for power and don't require specific voltage.

With that long introduction out of the way, my Wink tests could begin. Since my apartment is not done yet, I installed the Hub 2 with the Canary, the three GoControl sensors (two door and one PIR motion), Echo Dot, and Aeon Labs in the workplace: my pharmacy. I dabbled with different settings and options, then quickly figured a few that improved my day-to-day life and the pharmacy's security.

I've been using the Hub 2 for almost two months with this setup, and its performance has been solid throughout despite the frequent power cuts and the spotty internet connection here. Grab a cup of coffee and get ready to read my full detailed review.

SPECS

THE NOT SO GOOD

Quick hardware tour

The Wink Hub 2's hardware is not the star of the show, but we'll take a quick look at it nevertheless. In the box, you'll find the Hub 2, a couple of manuals, a power adapter and cable, and an Ethernet cable. The Hub 2 has a vertical tower shape with a thin top and a little wider bottom. It's white, with elegant and clean-looking edges, and inconspicuous enough to hide in any decor.

The front of the Hub 2 has a thin and long LED light that changes color depending on the Hub's state. It's white when it's powering up, blue when it's functional and listening to devices, and it quickly switches to green when an event is detected by a connected device (door opens, motion sensor triggered, switch turns on or off, etc...)

The Wink Hub 2's light subtly changes from blue to green when it detects an event.

And that's really all there is to the hardware side of the Wink Hub 2. The magic happens on the inside and through the application.

Easy guided setups

In all my years of testing and reviewing accessories, gadgets, and various electronics, I have never run across a device that has such a well thought-out integration with others. This is by far my favorite feature of the Wink Hub 2 and why I could easily recommend it to those who want to dabble into home automation but aren't keen on tinkering with things beyond a regular setup.

Wink has gone out of its way to make the process painless and none of the devices that I added took more than 2 minutes each to set up. I only had to look up info on the Aeon Labs switch because it's not officially supported - I found out I could just add it as a Leviton switch.

Wink Hub 2

The first device you have to add to the Wink app is the Hub 2. After choosing it among the different hubs, you plug it in, let the app discover it, introduce it to your WiFi network (or connect it via Ethernet), give it a name, and you're done. It takes 2 to 3 minutes and a couple of screen taps.

Other devices

Adding a device by search, barcode scan, or category browsing

After selecting the exact device you're setting up, you get to the detailed tutorials I mentioned above, with multiple steps that you can easily follow along for a painless setup. Once you're done, you can rename any device you add. My motion sensor is Moving McMoveface for example, and one of my door sensors is Doorothy. I... got carried away.

Above: Setting up the GoControl motion sensor.

Above: Setting up the GoControl door sensor.

Above: Setting up the Amazon Echo... or not.

The only device that doesn't really get set up like the rest is the Amazon Echo family. The Wink app only has a one-step tutorial page that explains that you should link your Wink from the Alexa app and not the other way around. And it only supports a small list of products (bulbs, dimmers, plugs, and Nest). After adding Wink to the Alexa app, you can turn these on or off with voice commands.

Handy tutorials

Some of the devices you add to your Wink app will unlock special sections in the app. Lights + Power and Sensors are two of the ones I ran into. All lights and switches and plugs get bundled up in the first and all sensors in the second, so as not to clog your app with each individual item. The first time these sections open up, you get nice on-screen tutorials, further simplifying the experience.

Lights + Power tutorial (above) and Sensors tutorial (below)

Intro to the Wink app

Whenever you open the Wink app on your device, it'll launch into the last used device on your system. But the bulk of the app is really located in the left side menu. Slide it over and instead of the regular list of options you typically see in other apps, Wink has 4 main tabs that serve different roles:

1. Home is where all your devices reside, including the Hubs, Sensors, Lights + Power, and more.
2. Shortcuts are manual mode switches you can create to quickly launch your home into a night scene or away scene. We'll further discuss them later.
3. Robots are the heart of Wink's system, letting you create automatic actions based on any trigger. Also to be discussed later.
4. Activity is where you can monitor every event that is recorded, manually executed, or automatically triggered by your Wink, like doors opening, lights toggling, mode switches, robots being activated, and more.

Home tab (left) and Activity tab (right) in Wink's rich side menu

The Home tab also houses a small user icon that lets you access your account settings. These are limited to your name, email, password, saved locations, and preferred units. All the settings are more tied to the devices you add to Wink and not your user account per se. One thing I have to note though here is that no matter how many times I set my display units to Celsius, they kept going back to Fahrenheit a few days later. I'm not sure why.

User settings are pretty basic.

Once you choose any device in the Home tab, your main screen switches to display that front and center. All devices on the Wink app follow a similar layout: main page for the device and whatever executable options you can perform right now + overflow menu that slides a page from the right with access to the device's activity, schedules, and settings.

Wink Hub 2

Since you can't really do something with the hub, the Wink Hub 2 only gives you an option to add a device to the system. In its settings, you can rename it, check for software updates, assign it to a location, add other users to control it, and access some support documents for it. There are also settings for WiFi and Z-Wave controls (network rediscovery, resetting Z-Wave, learning mode, inclusion mode, exclusion mode, and shift controller). Unless you're having issues with your system, I can't imagine you spending any time in this section of the app.

Wink Hub 2 product main page (left) and settings (middle and right).

Canary

Canary's main product page (left) and settings (right)

Canary's right side menu lets you access the camera's activity, where you can see each time the cam's mode switches, and its schedule where you can manually set it to change from home to away at a specific time. This scheduling function isn't available in the Canary app at all - the automatic changes there happen based on your phone's geofence - so it's nice to see a workaround way to implement it through Wink.

Canary's menu (left) and Activity (right). Dec 1: Oops, seems I was late to arrive and early to leave.

Lights and Power

All of your lamps, light switches, and power plugs show up in the Lights + Power page, either individually or grouped together. Simply tapping on an icon will tell Wink to switch its state from on to off (yellow becomes grey in the icon). You can choose an icon, rename your lights, assign a location to them, and give access to other users to control them.

Lights main page (left), light settings (middle), and icon choosing (right)

Groups let you toggle multiple lights on and off simultaneously. There's a default "All Lights" group but you can create more with any lamp, switch, or plug you have, and assign specific icons for them.

Light groups main page (left), creating a group (middle) and choosing its icon (right)

Like all devices on your Wink system, the overflow menu opens the right pane with your lights' activity, schedules, and settings.

Lights + Power's side menu (left) and activity (right). I was having fun, sorry!

Like the different lights and switches, all your sensors are grouped under their eponymous tab. You can see the last state of each sensor in its corresponding icon, which - cutely enough - changes as well. Check that open door with a cat standing outside.

Again, as with all devices, the right side menu reveals the activity and settings of each sensor. In this case, there's no access to schedules because you can't schedule a sensor to do anything. It's just a passive reporter on things that are happening.

Sensors' menu doesn't have a Schedule option (left), but there's a detailed Activity screen (right).

Each sensor has its specific settings page where you can check its connection and battery status, rename it, choose to get notifications on low battery or if someone tampers with it, assign it to a location, and give other users access to its data.

GoControl door sensor settings (left, middle left) and motion sensor settings (middle right, right).

Smart home automations

So far we've discussed everything you can see in the Wink app once you add your devices, plus all the manual switches you can tap to change a device's status. But that's not what the smart home is all about, is it? There should be automated things happening without your intervention and Wink lets you do that in one of three ways.

This is really where things might get confusing with the Wink app and system. Each device can be scheduled individually from the Schedule option you see in the right side menu (check Canary and Lights + Power above), but you can also create manual scenes (Shortcuts) and automatic ones (Robots).

If you want something to happen based on time of day only, you have to use the schedules, but if you want something to happen based on a trigger or a location change, you will have to use the robots. Scenes can't be launched automatically, so if you're setting a night mode, you will have to manually trigger it via the app, Alexa, IFTTT, or some other means. You could create an automatic robot for things to happen at, but you'd have to find a specific trigger that always works, otherwise you'd either be launching night mode at unintended times or failing to do it when needed.

Scheduling

I could add many other lights to this schedule if needed. I could also choose one specific date for example where the lights would stay on the whole time, say December 24 and 25. And schedules can be handily switched on and off without completely deleting them.

Shortcuts: Alexa, OK Google, and IFTTT integrations

Shortcuts, the second tab in the Wink app's left menu, are manual scene modes. Tapping them simply triggers said mode. You can add as many actions to a scene, like lights turning on and off, cameras switching their modes, robots activating and deactivating, and more.

Wink's Shortcuts menu (left), creating a shortcut (middle), and OK Google doesn't work now (right).

IFTTT applet for turning Away Mode on Wink with an Alexa command

Unfortunately, the OK Google commands, which are heavily emphasized in the app when you create a shortcut, do not work now. I successfully tested them for several weeks from my phone before I even got the Wink Hub 2 (you can use the Wink app and connect it to Canary without having a hub), but they stopped working about two months ago and haven't been fixed since.

If you have a Google Home, you can use IFTTT as a middle-man to trigger these with Assistant, but it's still just a workaround. I hope the recently opened Actions on Google will be used by Wink to appropriately integrate the hub and its shortcuts with Assistant.

Robots, Robots everywhere

The third and most important way you can add automation to your Wink is with Robots. Think of these as more powerful IFTTT applets for your entire system. You can choose any trigger you want but limit it to certain times and days, specify how long you want it to be true before the robot executes its command, and choose as many actions as you want in answer to it.

Example 1: Auto-arming and disarming security system

Since I have installed door and motion sensors in the pharmacy, I decided to use them to my advantage and get notified whenever they detected any activity. Below, you will see the different steps it takes to set up a motion sensor notification, from naming it, choosing one product and its trigger, specifying the time when it's active, how long it's active for, and the action that should be taken.

Basically, whenever I leave the pharmacy, I know that Canary will enter Away mode. (I could use Wink's location as a trigger, but Canary follows multiple users' location, which is better for my home in the future.) So when that happens and only if it happens between 6:55 pm and 10:00 am (remember, I close the pharmacy around 7pm and open it around 9:30am, but I'm not super timely about it), the robot I created above for Intruder Alert (notify me of a motion) and another robot for Door Open (notify me if the door opens) are enabled.

I have a similar robot that disables the Intruder Alert and Door Open robots when Canary enters Home mode between 8:45 am and 9:00 pm.

This means that my notification robots for the door and motion sensor are disabled whenever I'm at the pharmacy. They're also disabled when the pharmacy is open, even if I leave for a while or take off a little early, because they don't get triggered until closing time. So my assistant can keep the pharmacy open and patients can come in and leave without me getting notified. The notification robots are, however, active during night time, which is when I want to know about any suspicious activity.

Robots to control robots, but only in specific times and situations.

And this is the result in my Wink's activity feed. At 7pm, I opened the pharmacy's door to get out, closed it, the motion sensor stopped detecting motion, I drove away so Canary went to Away mode, and both Intruder Alert and Door open were enabled. When I come back in the morning, Canary detects I'm near the pharmacy, sets to Home mode, and both Intruder Alert and Door open are disabled.

Like clockwork.

It's a little bit like magic, everything works in unison to create a security system that enables and disables itself without me tapping a single button.

Example 2: Ecologically-minded Christmas cheer

After setting the Christmas lights on a schedule, I thought that maybe keeping them on the entire day wasn't a very power-friendly thing to do. Since the pharmacy isn't always busy with patients, I decided to limit the cheerful spirit to only when customers come in.

Power saving on the Christmas cheer.

Conclusion

After a couple of months, I can safely say that my Wink experiment has been a success. Everything was easy to set up and despite the first struggles in trying to understand the different facets to its automation (robots, shortcuts, schedules), I now have a great grasp of how everything works and how to make "magic" happen without my intervention.

The Wink system has been rock solid since I first set it up, never disconnecting from any device, never missing a notification. Honestly, I was expecting more issues based on some of the threads I've seen on Reddit, but I can't remember one instance where the Hub 2 let me down in two months. If I added more devices to my setup, maybe some issues would arise. But I can't say for sure. I'm more inclined to think that satisfied users are less likely to be vocal, so issues are disproportionately represented online.

And therein lies the dilemma with home automation: it's fun, addictive, with endless possibilities, but it's also expensive and relies on disparate systems and protocols that don't often work together or don't work at all in your country and with your home's setup. If you live in the US, some of these issues are nonexistent because unlike me, you won't have to worry about wiring, voltage, plug types, switch shapes, lamp sizes, Z-Wave frequencies, and, if I'm being bluntly honest, you won't have to add all the shipping expenses to get anything over to the other side of the planet. But you will have to consider security, usability, integrations with your other products, and the viability of anything you buy. It's a bit overwhelming, no matter how you slice and dice it.

For a first dip into home automation or anyone who just wants to get things that work together without too much hassle, I think that Wink has a very interesting proposition thanks to its simple setup, multiple wireless protocol support, powerful app and automations, and most importantly, its superb integration with third-party products from online documentation to in-app tutorials and support to endearingly accurate graphics that make things seem more approachable for everyone.

Buy: Wink Hub 2 $99 on Amazon, Wink

Handy sources: Wink Wiki (list of all supported devices including non-official ones, hacks, and more), Wink Hub on Reddit, Wink Users Group on Facebook